Essential Safety Equipment; Always remove the head restraint and set; the tether strap (except when installing a- Page 56

2018 Mazda MAZDA3 4-Door Mazda3 Owners Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

Always remove the head restraint and set
the tether strap (except when installing a
backless booster seat):

Routing the tether strap on top of the head
restraint is dangerous. In a collision the
tether strap could slide off the head
restraint and loosen the child-restraint
system. The child-restraint system could
move which may result in death or injury to
the child.

Anchor bracket

Tether strap

(4-Door)

Tether strap

Forward

(5-Door)

Always attach the tether strap to the
correct tether anchor position:

Attaching the tether strap to the incorrect
tether anchor position is dangerous. In a
collision, the tether strap could come off
and loosen the child-restraint system. If the
child-restraint system moves it could result
in death or injury to the child.

Always install the head restraint and adjust
it to the appropriate position after
removing the child-restraint system:

Driving with the head restraint removed is
dangerous as impact to the occupant's
head cannot be prevented during
emergency braking or in a collision, which
could result in a serious accident, injury or
death.
Refer to Head Restraints on page 2-10.

 

Installation on rear center seat

The LATCH lower anchors at the center of
the rear seat are much further apart than
the sets of LATCH lower anchors for
child-restraint system installation at other
seating positions. Child-restraint systems
with rigid LATCH attachments cannot be
installed on the center seating position.
Some LATCH equipped child-restraint
systems can be placed in the center
position and will reach the nearest LATCH
lower anchors which are 443 mm (17.4 in)
apart. LATCH compatible child-restraint
systems (with attachments on belt
webbing) can be used at this seating
position only if the child-restraint system
manufacturer's instructions state that the
child-restraint system can be installed to
LATCH lower anchors that are 443 mm
(17.4 in) apart. Do not attach two
child-restraint systems to the same
LATCH lower anchor. If your
child-restraint system has a tether, it must
also be used for your child's optimum
safety.
 
The procedure for installation on the rear
outboard seats is the same.

Essential Safety Equipment

Child-Restraint

2-42

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Detailed Information for 2018 Mazda MAZDA3 4-Door Mazda3 Owners Manual

Lists of information found in 2018 Mazda MAZDA3 4-Door Mazda3 Owners Manual - Page 56

  • 17.4 in) apart.
  • 17.4 in) apart.

Related Documents for 2018 Mazda MAZDA3 4-Door Mazda3 Owners Manual