Before Driving; Doors and Locks- Page 88

3–14

Before Driving

Doors and Locks

y

  Confi rm that all doors and the liftgate 

are securely locked.

  For the liftgate/trunk lid, move it 

without pressing the electric liftgate/
trunk lid opener to verify that the 
liftgate/trunk lid has not been left ajar.

y

  All doors and the liftgate cannot be 

locked when any door or the liftgate is 
open.

y

  It may require a few seconds for the 

doors to unlock after the request switch 
is pressed.

y

  A beep sound is heard for confi rmation 

when the doors and the liftgate are 
locked/unlocked using the request 
switch. If you prefer, the beep sound can 
be turned off.

  The volume of the beep sound can also 

be changed. Refer to Personalization 
Features on page  9-10 .

  Use the following procedure to change 

the setting.

   1.   Switch the ignition off and close all 

of the doors and the liftgate/trunk 
lid.

   2.   Open  the  driver's  door.

   3.   Within 30 seconds of opening the 

driver's door, press and hold the 
LOCK button on the key for 5 
seconds or longer.

    All of the doors and the liftgate lock 

and the beep sound activates at the 
currently set volume. (If the beep 
sound is currently set to not activate, 
it will not activate.) The setting 
changes each time the LOCK button 
on the key is pressed and the beep 
sound activates at the set volume. (If 
the beep sound has been set to not 
activate, it will not activate.)

   4.   The setting change is completed by 

doing any one of the following:

y

  Switching the ignition to ACC or 

ON.

y

  Closing the driver's door.

y

  Opening the liftgate/trunk lid.

y

  Not operating the key for 10 

seconds.

y

  Pressing any button except the 

LOCK button on the key.

y

  Pressing a request switch.

y

(With theft-deterrent system)

  The hazard warning lights fl ash when 

the theft-deterrent system is armed or 
turned off.

  Refer to Theft-Deterrent System on page 

 3-43 .