Before Driving; Doors and Locks- Page 91

3–17

Before Driving

Doors and Locks

   NOTE

y

  Function number 3 is the factory setting 

for your vehicle.

y

  There are only a total of fi ve auto lock/

unlock settings available for automatic 
transaxle vehicles, and three for manual 
transaxle vehicles. Be sure to press the 
unlock side of the driver's door-lock 
switch the correct number of times 
according to the selected function 
number. If the switch is mistakenly 
pressed six times on an automatic 
transaxle vehicle or four times on a 
manual transaxle, the procedure will 
be cancelled. If this occurs, start the 
procedure from the beginning.

 Function 

number 

 Function 

*1

 1 

 The auto door-lock function is 
disabled.

 2 

 All the doors and the liftgate lock 
automatically when the vehicle speed 
is about 20 km/h (12 mph) or more. 

 3 

 All the doors and the liftgate lock 
automatically when the vehicle speed 
is about 20 km/h (12 mph) or more. 
All the doors and the liftgate unlock 
when the ignition is switched from 
ON to Off. 

 4 

(Automatic transaxle vehicles only)

  When the ignition is switched ON 
and the shift lever is shifted from 
park (P) to any other gear position, 
all the doors and the liftgate lock 
automatically. 

 5 

(Automatic transaxle vehicles only)

  When the ignition is switched ON 
and the shift lever is shifted from 
park (P) to any other gear position, 
all the doors and the liftgate lock 
automatically.
  When the shift lever is shifted to park 
(P) while the ignition is switched ON, 
all the doors and the liftgate unlock 
automatically. 

     *1   Other settings for the auto door lock function are 

available at an Authorized Mazda Dealer. For 
details consult an Authorized Mazda Dealer. Refer 
to Personalization Features on page  9-10 .

  Settings can be changed using the 
following procedure.

   1.   Safely park the vehicle. All doors must 

remain closed.

   2.   Switch  the  ignition  ON.
   3.   Press and hold the lock side of the 

driver's door-lock switch within 20 
seconds of switching the ignition ON, 
and make sure a beep sound is heard 
about eight seconds afterwards.