Interior Features; Pairing a Bluetooth; has a four-digit PIN code- Page 347

5–85

Interior Features

Bluetooth

®

NOTE



  If a Bluetooth

®

 device has already been 

paired to the vehicle as a hands-free 

mobile phone, it does not need to be 

paired again when using the device as 

a Bluetooth

®

 audio device. Conversely, 

it does not need to be paired again as 

a hands-free mobile phone if it has 

already been paired as a Bluetooth

®

audio device.



  Device registration can also be done 

using voice recognition.

Concerning the operation of a Bluetooth

®

audio device itself, refer to its instruction 

manual.

Some Bluetooth

®

 audio devices have PIN 

codes (four digits). Refer to the audio 

device's instruction manual because the 

pairing procedure differs depending on 

whether it has a PIN code or not.

Pairing a Bluetooth

®

 audio device which 

has a four-digit PIN code

1.  Using the audio control dial, select 

the pairing mode “PAIR DEVICE” 

in the “BT SETUP” mode. (Refer to 

“Bluetooth

®

 audio device set-up” for 

details.)

2.  Press the audio control dial to 

determine the mode. After “ENTER 

PIN” is displayed on the audio display 

for three seconds, “PIN 0000” is 

displayed and the PIN code can be 

input.

3.  Input the PIN code of your Bluetooth

®

audio device by pressing channel preset 

buttons 1 to 4 while “PIN 0000” is 

displayed.

  Press channel preset button 1 to input 

the first digit, 2 for the second, 3 for the 

third, and 4 for the forth. For example, 

if the PIN code were “4213” press 

channel preset button 1 four times (1, 

2, 3, 4), button 2 twice (1, 2), button 

3 once (1), and button 4 three times 

(1, 2, 3). If the “PIN 0000” display 

disappears before finishing the PIN 

code input, repeat the procedure from 

Step 1.

NOTE

Some devices accept only a particular 

pairing code (Usually, “0000” or 

“1234”).

If pairing cannot be completed, refer to the 

owner's manual of your mobile device, and 

try those numbers if necessary.

4.  Press the audio control dial while 

the input PIN code is displayed. 

“PAIRING” flashes on the audio 

display.

5.  Operate the Bluetooth

®

 audio device 

and set it to the pairing mode while 

“PAIRING” is flashing.

6.  When the pairing is completed,   and 

“PAIR SUCCESS” are displayed after 

about 10-30 seconds, after which 

“PAIR SUCCESS” continues to be 

displayed for three seconds, and then 

the unit returns to the normal display.

Mazda3_8FA4-EA-15G_Edition1.indb   85

2015/05/11   14:01:47