Interior Features; Pairing a Bluetooth; does not have a four-digit PIN code- Page 348

5–86

Interior Features

Bluetooth

®

NOTE



  Some Bluetooth

®

 audio devices need a 

certain amount of time before the   

symbol is displayed.



  If the pairing failed, “Err” flashes for 

three seconds .



  Pairing cannot be performed while 

the vehicle is moving. If you attempt 

to perform pairing while the vehicle is 

moving, “PAIR DISABLE” is displayed.



  If seven Bluetooth

®

 audio devices have 

already been paired to the vehicle, 

pairing cannot be performed and 

“MEMORY FULL” is displayed. Delete 

one paired device to pair another one.

Pairing a Bluetooth

®

 audio device which 

does not have a four-digit PIN code

1.  Using the audio control dial, select 

the pairing mode “PAIR DEVICE” 

in the “BT SETUP” mode. (Refer to 

“Bluetooth

®

 audio set up” for details.)

2.  Press the audio control dial to 

determine the mode. After “ENTER 

PIN” is displayed on the audio display 

for three seconds, “PIN 0000” is 

displayed and the PIN code can be 

input.

3.  Press the audio control dial while “PIN 

0000” is displayed. “PAIRING” flashes 

on the audio display.

4.  Operate the Bluetooth

®

 audio device 

and set it to the pairing mode while 

“PAIRING” is flashing.

5.  As the Bluetooth

®

 audio device 

requires a PIN code, input “0000”.

6.  When the pairing is completed,   and 

“PAIR SUCCESS” are displayed after 

about 10-30 seconds, after which 

“PAIR SUCCESS” continues to be 

displayed for three seconds, and then 

the unit returns to the normal display.

NOTE



  If pairing cannot be completed, try 

“1234” instead. Refer to the owner's 

manual of your mobile device for the 

right PIN code.



  Some Bluetooth

®

 audio devices need a 

certain amount of time before the   

symbol is displayed.



  If the pairing failed, “Err” flashes for 

three seconds.



  Pairing cannot be performed while 

the vehicle is moving. If you attempt 

to perform pairing while the vehicle is 

moving, “PAIR DISABLE” is displayed.



  If seven Bluetooth

®

 audio devices have 

already been paired to the vehicle, 

pairing cannot be performed and 

“MEMORY FULL” is displayed. Delete 

one paired device to pair another one.

Device selection

If several devices have been paired, the 

Bluetooth

®

 unit links the device last 

paired. If you would like to link a different 

paired device, it is necessary to change the 

link. The order of device priority after the 

link has been changed is maintained even 

when the ignition is switched off.
1.  Using the audio control dial, select the 

link change mode “LINK CHANGE” 

in the “BT SETUP” mode. (Refer to 

“Bluetooth

®

 audio device set-up” for 

details.)

2.  Press the audio control dial to 

determine the mode.

3.  The name of the currently linked 

Bluetooth

®

 audio device is displayed.

  If no Bluetooth

®

 audio device is 

currently linked, the name of the first 

device among the paired devices is 

displayed.

Mazda3_8FA4-EA-15G_Edition1.indb   86

2015/05/11   14:01:47