Step 1; When Driving; Complete the programming within 30- Page 199

2019 Mazda Mazda3 Hatchback Owners Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

NOTE

Some gate operators and garage door
openers may require you to replace
this Programming Step 3 with
procedures noted in the “Gate
Operator/Canadian Programming”
section.

4. Press the HomeLink button again to

check if the programming has been
completed.

If the indicator light remains on in
green, the programming is complete
and the device becomes operational.

If the indicator light flashes rapidly
in green, firmly press and hold the
Homelink button and release it after
two seconds have passed. Repeat
this process up to three times to
complete the programming. The
device becomes operational and
programming is complete. If the
device does not operate, go to the
next step.

5. At the garage door opener receiver

(motor-head unit) in the garage, locate
the “learn” or “smart” button. This can
usually be found where the hanging
antenna wire is attached to the
motor-head unit.

6. Firmly press and release the “learn” or

“smart” button. (The name and color
of the button may vary by
manufacturer.)

NOTE

Complete the programming within 30
seconds.

7. Return to the vehicle and firmly 

press

and 

hold

 the Homelink button, and

then 

release

 it after two seconds have

passed. Repeat the “

press/hold/

release

” sequence a second time, and,

depending on the brand of the garage
door opener (or other rolling code
equipped device), repeat this sequence
a third time to complete the
programming process.
Press the programmed HomeLink
button and make sure that the
HomeLink System operates.

8. If the status indicator arrows are

flashing, refer to Garage Door
Two-Way Communication.

1. Indicator light

NOTE

To program the remaining two HomeLink
buttons, go back to 

Step 1

 of

Programming the HomeLink System and
repeat the procedure.

For questions or comments, please contact

HomeLink at www.homelink.com

 or

www.youtube.com/HomeLinkGentex

, or

the HomeLink toll-free hotline at
1-800-355-3515 (for calls placed outside
of the USA, Canada, and Puerto Rico,
international rates will apply and may
differ based on landline or mobile phone).

When Driving

Switches and Controls

4-59

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58

Detailed Information for 2019 Mazda Mazda3 Hatchback Owners Manual

Lists of information found in 2019 Mazda Mazda3 Hatchback Owners Manual - Page 199

  • 4. Press the HomeLink button again to check if the programming has been completed.
  • 5. At the garage door opener receiver (motor-head unit) in the garage, locate the “learn” or “smart” button.
  • 6. Firmly press and release the “learn” or “smart” button.
  • 7. Return to the vehicle and firmly press and hold the Homelink button, and then release it after two seconds have passed.
  • 8. If the status indicator arrows are flashing, refer to Garage Door Two-Way Communication.
  • 1. Indicator light NOTE To program the remaining two HomeLink buttons, go back to Step 1 of Programming the HomeLink System and repeat the procedure.