Seat Recline; Seat Slide; Height Adjustment- Page 20

4.

Seat Recline

To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position
and release the lever.
Make sure the lever returns to its
original position and the seatback is
locked in place by attempting to push
it forward and backward.

Power seat

1.

Seat Slide

To slide the seat, move the slide lifter
switch on the outside of the seat to the
front or back and hold it. Release the
switch at the desired position.

2.

Height Adjustment

To adjust the seat height, move the
slide lifter switch up or down.

3.

Height Adjustment for Front Edge
of Seat Bottom

To adjust the front height of the seat
bottom, raise or lower the front of the
slide lifter switch.

4.

Seat Recline

To change the seatback angle, press the
front or rear side of the reclining
switch. Release the switch at the
desired position.

5.

Lumbar Support Adjustment

To increase the seat firmness, press
and hold the front part of the switch to
the desired position, then release it.
Press the rear part of the switch to
decrease firmness.

Before making adjustments to the
driving position recommended by
Mazda

Before making adjustments, move the
steering wheel and seat to their default
positions.

How to move the steering wheel to its
default position

WARNING

Never adjust the steering wheel while the
vehicle is moving:

Adjusting the steering wheel while the
vehicle is moving is dangerous. Moving it
can very easily cause the driver to abruptly
turn to the left or right. This can lead to loss
of control or an accident.

Essential Safety Equipment

Seats

2-6

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58