Essential Safety Equipment; Programming to a position; Programming to the transmitter- Page 25



Driver’s seat position (seat slide, height
adjustment, front edge of seat bottom,
seat recline)
Refer to Adjusting the Driver's Seat on
page 2-5.



Active driving display (display position,
brightness level, display information)
Refer to Active Driving Display on page
4-28.



Outside mirror angle
Refer to Outside Mirrors on page 3-29.

CAUTION

Do not place fingers or hands around the
bottom of the seat while the seat memory
function is operating. The seat moves
automatically while the seat memory
function is operating and fingers or hands
could get pinched and injured.

1. 1 button
2. 2 button
3. SET button
 
A driving position can be programmed to
the following parts.



Position memory button



Transmitter used for vehicle

NOTE



Lumbar support adjustment cannot be
programmed.

Programming

1. Make sure the parking brake is on.
2.

(Automatic transmission)

Make sure the selector lever is in the P
position.

3. Switch the ignition ON.
4. Adjust the following parts to the

desired conditions.



Driver's seat



Active driving display



Outside mirrors

5. Press the SET button continuously

until a sound is activated.

6. Do the following operation within 5

seconds after the sound is activated to
program the driving position.



Programming to a position
memory button

Press the button you want to
program, either 1 or 2 button.



Programming to the transmitter

Press the unlock button on the
transmitter.

A sound is activated when the
operation is completed correctly.

NOTE



If you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.



If the angle of the outer mirrors only
changes a little, the angle of the outer
mirrors may not have been programmed
correctly.

Essential Safety Equipment

Seats

2-11

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58