Collision Warning; When Driving; Active driving display- Page 295



If a malfunction is detected or the
system temporarily stops the function
due to dirty sensors (such as radar
sensor or Forward Sensing Camera
(FSC)), the i-ACTIVSENSE warning
indication/warning light turns on and a
message is displayed on the
multi-information display and active
driving display.



On a manual transmission vehicle, the
engine stops if the clutch pedal is not
depressed when the vehicle is stopped by
the SBS brake operation.



If the vehicle is stopped by the SBS
brake operation and the brake pedal is
not depressed, the SBS brake is
automatically released after about 2
seconds.

▼

Collision Warning

When there is a possibility of a collision
with a vehicle ahead, the collision warning
sound is activated continuously and a
warning is displayed on the
multi-information display and the active
driving display.

Multi-information display

1. “BRAKE!” message is displayed
 

Active driving display

1. “BRAKE!” message is displayed

NOTE



The collision warning sound is activated
intermittently while the SBS brake or
brake assist (SBS brake assist) is
operating.



The operation distance and volume of
the collision warning can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

▼

Stopping the Smart Brake Support
(SBS) System Operation

The SBS can be changed to inoperable.



(If only the SBS is turned off)

Refer to the Settings section in the
Mazda Connect Owner's Manual.



(If the SBS is turned off by operating
the i-ACTIVSENSE switch)

Refer to i-ACTIVSENSE Switch on
page 4-85.

When turning off the SBS, the SBS OFF
indicator light turns on.

NOTE

If the engine is stopped with the SBS
turned off, the SBS becomes operational
when the engine is started the next time.

When Driving

i-ACTIVSENSE

4-155

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58