Low Washer Fluid Level Warning; If Trouble Arises; Action to be taken- Page 511

Mexico

The seat belt warning light turns on if the
driver or front passenger's seat is occupied
and the seat belt is not fastened with the
ignition switched ON.
If the driver or front passenger's seat belt
is unfastened (only when the front
passenger's seat is occupied) and the
vehicle is driven at a speed faster than
about 20 km/h (12 mph), the warning light
flashes. After a short time, the warning
light stops flashing, but remains
illuminated. If a seat belt remains
unfastened, the warning light flashes again
for a given period of time.

NOTE



Placing heavy items on the front
passenger's seat may cause the front
passenger's seat belt warning function
to operate depending on the weight of
the item.



To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on
the front passenger's seat. The sensor
may not function properly because the
additional seat cushion could cause
sensor interference.



If a small child is seated on the front
passenger's seat, the warning light may
not operate.

Action to be taken

Fasten the seat belts.

▼

Seat Belt Warning Light (Rear seat)
(Red)

If the rear seat belts are not fastened while
the ignition is switched ON , the driver
and the passenger are alerted by the
warning light.
The warning light operates even if there is
no passenger on the rear seat.

NOTE

If a rear seat belt is not fastened by a
certain period of time after the engine has
been started, the warning light turns off.

Action to be taken

Fasten the seat belts.

▼

Low Washer Fluid Level Warning
Indication/Warning Light

*

This warning light indicates that little
washer fluid remains.

Action to be taken

Add washer fluid (page 6-19).

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

7-35

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58