Essential Safety Equipment; Child Restraint; Use the tether and tether anchor only for a- Page 66

3. Remove the cover of the child-restraint

system's ISOFIX/LATCH

*1

 lower

anchors to verify the locations of the
ISOFIX/LATCH

*1

 lower anchors.

1. Lower anchor
 

NOTE



The ISOFIX/LATCH

*1

 lower

anchors marking on the cover
indicates the position of the ISOFIX/
LATCH

*1

 lower anchors for the

attachment of a child-restraint
system.



Store the removed cover so that it
does not get lost.

4. Remove the head restraint. However,

when installing a backless booster seat,
always install the vehicle head restraint
to the seat where the backless booster
seat is installed.
Refer to Head Restraints on page 2-17.

5. Secure the child-restraint system using

BOTH ISOFIX/LATCH

*1

 lower

anchors, following the child-restraint
system manufacturer's instruction. Pull
on the child-restraint to be sure both
anchors are engaged.

6. If your child-restraint system came

equipped with a tether, that means it is
very important to properly secure the
tether for child safety. Please carefully
follow the child-restraint system
manufacturer's instructions when
installing tethers.

*

1 ISOFIX (Mexico)/LATCH (Except

Mexico)

WARNING

Use the tether and tether anchor only for a
child-restraint system:

Using the tether or tether anchor to secure
anything but a child-restraint system is
dangerous. This could weaken or damage
the tether or tether anchor and result in
injury.

Always remove the head restraint and
install child-restraint system (except when
installing a backless booster seat):

Installing a child-restraint system without
removing the head restraint is dangerous.
The child-restraint system cannot be
installed correctly which may result in
death or injury to the child in a collision.

(4–Door)

1. Tether strap

Essential Safety Equipment

Child Restraint

2-52

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58