Jam-safe Window; Power window system initialization- Page 126

▼

Auto-opening/Closing

To fully open the window

automatically, press the switch

completely down, then release. The

window will fully open automatically.

To fully close the window

automatically, pull the switch

completely up, then release. The

window will fully close automatically.

To stop the window partway, pull or

press the switch in the opposite

direction and then release it.

NOTE

Power window system initialization

procedure

If you operate the switch any number

of times with the power window not

fully closed, the window may no longer

fully open/close automatically.

The power window auto function will

only resume on a power window that

has been reset.

1. Switch the ignition ON.

2. Make sure that the power window

lock switch located on the driver's

door is not depressed.

3. Press the switch and fully open the

window.

4. Pull up the switch to fully close the

window and continue holding the

switch for about 2 seconds after the

window fully closed.

5. Make sure that the power windows

operate correctly using the door

switches.

▼

Jam-safe Window

When the window is closing and a

foreign object is detected between the

window and the window frame, the

window stops closing and

automatically opens partway.

NOTE



The jam-safe function may operate

under the following conditions:



A strong impact is detected while

the window is closing.



The window is closing in very low

temperatures.



(A window cannot be closed)

If the jam-safe function has operated

and the window cannot be closed,

check around the window frame for

a foreign object.

If there is no foreign object around

the window frame, forcibly close a

window using the following

procedure.

1. After switching the ignition OFF,

wait for 45 seconds or longer.

2. Switch the ignition ON.

3. Operate the switch in the

direction to close the window

until the jam-safe function

operates and the window stops.

Repeat this operation a total of 5

times.

4. Continue pulling up the switch to

fully close the window.

Before Driving

Windows

3-36

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34