HomeLink at www.homelink.com; Always check the areas surrounding; garage doors and gates for people or- Page 203

Using these garage door openers can

increase the risk of serious injury or

death. For further information, contact

HomeLink at www.homelink.com

 or

www.youtube.com/HomeLinkGentex

or an Authorized Mazda Dealer.

Always check the areas surrounding

garage doors and gates for people or

obstructions before programming or

during operation of the HomeLink

system:

Programming or operating the

HomeLink system without verifying the

safety of areas surrounding garage

doors and gates is dangerous and

could result in an unexpected accident

and serious injury if someone were to

be hit.

NOTE

The programming will not be erased

even if the battery is disconnected.

▼

Pre-programming the HomeLink

System

NOTE

It is recommended that a new battery

be placed in the hand-held transmitter

of the device being programmed to

HomeLink for quicker training and

accurate transmission of the

radio-frequency signal.



Verify that there is a remote control

transmitter available for the device

you would like to program.

▼

Programming the HomeLink

System

The HomeLink system provides 3

buttons which can be individually

selected and programmed using the

transmitters for current, on-market

devices as follows:

1. Press and release the HomeLink

button you would like to program.

The indicator light 

fl

ashes slowly in

amber when the button is pressed.

1. Indicator light

2. HomeLink button

2. Hold the hand-held transmitter 2.5

to 7.5 cm (1 to 3 in) away from the

HomeLink button you would like to

program while keeping the

indicator light in view.

NOTE

Depending on the hand-held

transmitter, it may be easier to do

the programming by holding it 15

to 20 cm (6 to 7.8 in) away from

the HomeLink button.

3. Press the hand-held transmitter

button continuously until the

indicator light changes from amber

(

fl

ashing) to green (on/

fl

ashing).

When Driving

Switches and Controls

4-61

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34