To Turn O- Page 216

2021 Mazda Mazda3 Hatchback Owners Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

NOTE

If the Electric Parking Brake (EPB)

switch is pulled while the

AUTOHOLD is operating, the

parking brake is applied and the

AUTOHOLD is released. In addition,

if the parking brake is released under

this condition, the AUTOHOLD

operates to hold the brakes.

Under the following conditions, the

parking brake is automatically

applied and the AUTOHOLD is

released. The AUTOHOLD is

re-enabled when the conditions

before the AUTOHOLD is released

are restored.

The driver’s seat belt is unfastened.

The driver’s door is opened.

When about 10 minutes or longer

have passed since the AUTOHOLD

operation started, the parking brake

is automatically applied. Because the

AUTOHOLD is restored when

releasing the parking brake, the hold

on the brakes by AUTOHOLD

function resumes.

(Manual transmission vehicle)

When starting to drive the vehicle

forward or in reverse on a down

slope, depress the clutch pedal and

shift the shift lever to the appropriate

position for driving in the desired

direction, and then depress the

accelerator pedal to release the

AUTOHOLD.

The AUTOHOLD can be canceled

forcibly by fully depressing the

accelerator pedal for 1 second or

longer while the AUTOHOLD is

operating. Forcibly cancel the

AUTOHOLD only when the

AUTOHOLD cannot be canceled due

to a system malfunction or it is

necessary to cancel the AUTOHOLD

in an emergency.

To Turn O

 AUTOHOLD System

Depress the brake pedal and press the

AUTOHOLD switch. The AUTOHOLD

is turned o

 and the AUTOHOLD

standby indicator light turns o

.

1. AUTOHOLD standby indicator light

NOTE

When the brakes are not held such

as while driving the vehicle, the

AUTOHOLD can be turned o

 only

by pressing the AUTOHOLD switch.

If the AUTOHOLD switch is pressed

without depressing the brake pedal

while AUTOHOLD is operating

(AUTOHOLD active indicator light in

instrument cluster is turned on), the

message “Depress Brake Pedal and

Operate Switch to Release” is

indicated on the multi-information

display to notify the driver to depress

the brake pedal.

When Driving

Brake

4-74

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34

Detailed Information for 2021 Mazda Mazda3 Hatchback Owners Manual

Lists of information found in 2021 Mazda Mazda3 Hatchback Owners Manual - Page 216

  • 1. AUTOHOLD standby indicator light NOTE  When the brakes are not held such as while driving the vehicle, the AUTOHOLD can be turned o ff only by pressing the AUTOHOLD switch.