Changing the Set Vehicle Speed; Canceling the system- Page 269

Changing the Set Vehicle Speed
(To accelerate/decelerate using the

RES switch)

When the RES switch is pressed up

(SET+), the vehicle accelerates and

when the RES switch is pressed down

(SET

-

), it decelerates.



Press and release immediately: 1

km/h (1 mph)



Press and hold: 10 km/h (5 mph)

(To increase speed using accelerator

pedal)

Depress the accelerator pedal and

press the RES switch up (SET+) or

down (SET

-

) at the desired speed. If

the switch is not operated, the system

returns to the set speed after you

release your foot from the accelerator

pedal.

NOTE



The warnings and brake control do

not operate while the accelerator

pedal is depressed.

Canceling the system

When the following operations are

performed, the MRCC system is

canceled, and the MRCC set indication

(green) switches to the MRCC standby

indication (white) at the same time.



The CANCEL switch is pressed.



The brake pedal is depressed.



The shift lever is in the reverse (R)

position.

Under the following conditions, the

MRCC cancel indication is displayed in

the multi-information display and a

single beep sound is heard.



The DSC has operated.



The Smart Brake Support (SBS) has

operated.



When traveling on a downslope for a

long period of time.



There is a problem with the system.



The vehicle speed decreases to less

than 25 km (16 mph).



The shift lever is shifted to neutral

(N) for a certain period of time.



The clutch is depressed for a certain

period of time.



The engine stalls.



The front radar sensor cannot detect

target objects (during rain, fog, snow

or other inclement weather

conditions, or when the radiator

grille is dirty).



The parking brake is applied.



Any of the doors is opened.



The driver's seat belt is unfastened.



The operation frequency of the

braking by the MRCC control is high.

Resuming control

If the MRCC system is canceled, you

can resume control at the previously

set speed by pressing the RES switch

and after all of the operation

conditions have been met.

NOTE

If the set speed is not indicated in the

display, the control does not resume

even if the RES switch is pressed.

Turning o

ff

 the system

When the MRCC switch is pressed

while the MRCC is operating, the

MRCC turns o

ff

.

When Driving

i-ACTIVSENSE

4-127

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34