Stop Hold Control; To resume driving- Page 280

Resuming control

If the MRCC with Stop & Go function

system is canceled, you can resume

control at the previously set speed by

pressing the RES switch and after all of

the operation conditions have been

met.

NOTE

If the set speed is not indicated in the

display, the control does not resume

even if the RES switch is pressed.

Turning o

ff

 the system

When the MRCC switch is pressed

while the MRCC is operating, the

MRCC turns o

ff

.

▼

Stop Hold Control

While in headway control using the

MRCC with Stop & Go function

system, your vehicle will stop when a

vehicle ahead stops. When the vehicle

is stopped and the stop hold control

operates, the MRCC with Stop & Go

function indicator light turns on.

NOTE



If the MRCC with Stop & Go

function system is canceled during

stop hold control, the vehicle is held

in its stopped position.



The parking brake is automatically

applied and the vehicle is held in its

stopped position when 10 minutes

have elapsed since the stop hold

control operated. At this time, the

MRCC with Stop & Go function

system is canceled.



The brake lights turn on during stop

hold control.

To resume driving

After the vehicle ahead starts moving

while your vehicle is stopped under

stop hold control, press the RES switch

or depress the accelerator pedal to

cancel the stop hold control and

resume driving.

When Driving

i-ACTIVSENSE

4-138

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34