Display (Manual Transmission); Indication on display; Stop Hold Control (Automatic- Page 295

NOTE



If the set speed is not indicated on the display, the system does not operate even if

the RES switch is pressed.



After the operation, the steering assist operation may not operate for a period of 5

seconds at the most until the lane lines are detected or a vehicle ahead is

recognized.

Turning o

ff

When the TJA switch is pressed while the TJA is operating, the TJA turns o

ff

.

▼

Shift-up/Shift-down Request

Display (Manual Transmission)

The shift-up or shift-down request

display might be displayed while the

TJA is operating. When this occurs, shift

gears because the gear position is not

appropriate.

Request

Indication on display

Shift up

Shift Up to a Higher Gear

Shift down

Shift Down to a Lower Gear

NOTE



If the gears are not shifted up even

though the shift-up request

indication is displayed, load will be

applied to the engine and the TJA

might be automatically canceled or

engine damage could occur.



If the gears are not shifted down

even though the shift-down request

indication is displayed, the TJA might

be automatically canceled or engine

stalling could occur.

▼

Stop Hold Control (Automatic

Transmission)

While in headway control using the

TJA, your vehicle will stop when a

vehicle ahead stops. When the vehicle

is stopped and the stop hold control

operates, the TJA indicator light turns

on.

NOTE



Even if the TJA is temporarily

canceled during stop hold control,

the vehicle is held in its stopped

position.



The parking brake is automatically

applied and the vehicle is held in its

stopped position when 10 minutes

or longer have passed since the stop

hold control operated. When this

occurs, the TJA is temporarily

canceled.



The brake lights turn on during stop

hold control.

When Driving

i-ACTIVSENSE

4-153

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34