Replacing Rear Window Wiper- Page 465

7. After pulling the blade rubber in the

direction of the arrow and sliding

the blade rubber to a position to

check the blade holder groove,

slide the blade rubber end in the

opposite direction.

8. Make sure that the blade rubber is

correctly installed to the blade

holder.

9. Slide the blade component and

install it to the wiper arm.

10.Slowly lower the wiper arms onto

the windshield.

11.Move the wipers to their initial

positions using the following

procedure.

a) Make sure that the wipers are set

on the windshield.

b) Switch the ignition ON.

c) Press up the wiper switch to the

MIST position 1 time.

When the procedure is

completed, the wipers operate

and they stop at the initial

positions.

▼

Replacing Rear Window Wiper

Blade (5-Door)

When the wiper no longer cleans well,

the blade is probably worn or cracked.

Replace it.

CAUTION

To prevent damage to the wiper arm

and other components, do not move

the wiper by hand.
1. Remove the cover.

Maintenance and Care

Owner Maintenance

6-27

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34