Action to be taken- Page 534

Display

*1*2

Content

Action to be taken

Mazda Radar Cruise
Control Canceled. Drive
Safely

This message is indicated when the
Mazda Radar Cruise Control
(MRCC), Mazda Radar Cruise Con-
trol with Stop & Go function (MRCC
with Stop & Go function), and the
Tra

ffi

c Jam Assist (TJA) have been can-

celed other than by the driver.

Have your vehicle inspected by an
Authorized Mazda Dealer.

Distance & Speed Alert
Operation Canceled
Drive Safely

This message is indicated when the
Distance & Speed Alert (DSA) have
been canceled other than by the driv-
er.

Have your vehicle inspected by an
Authorized Mazda Dealer.

Cruise Control Opera-
tion Canceled. Drive
Safely

This message is indicated when the
Cruise Control have been canceled
other than by the driver.

Have your vehicle inspected by an
Authorized Mazda Dealer.

Emergency Braking Acti-
vated. Depress Brake
Pedal to Hold Stop

This message is indicated after the
Smart Brake Support (SBS) brakes op-
erate and when the Smart Brake Sup-
port (SBS) is canceled.

Depress the brake pedal.

Touch Key Fob to Push
Button Start Switch

This message is indicated when the
key battery is weak (battery dead or
damaged key).

Touch the key against push button
start to start the engine.
Refer to Engine Start Function When
Key Battery is Dead on page 4-8.

Depress Brake Pedal to
Start Vehicle

This message is indicated when the
push button start is pressed without
depressing the brake pedal.

When starting the engine, press the
push button start with the brake ped-
al depressed.

Depress Clutch Pedal to
Start Vehicle

This message is indicated when the
push button start is pressed without
depressing the clutch pedal.

When starting the engine, press the
push button start with the clutch
pedal depressed.

Check Gear Selector
Lever Position

This message is indicated when the
selector lever is shifted to the P or R
position while driving.

Check the selector lever position.

Close Door and Fasten
Seat Belt

This message is indicated when AU

-

TOHOLD is about to operate and a
door is opened or a seat belt is unfas-
tened.

When the AUTOHOLD is turned on,
close the doors and fasten seat belts.

Wiper Blades Must Be
on Windshield Before
Operating

This message is indicated when the
ignition is switched ON with the wip-
er arms at the service positions.

Return the wiper arms to the initial
positions.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

7-40

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34