How to set the speed; Indication on multi-information; Indication on active driving dis-- Page 276

When the MRCC switch is pressed once, the MRCC with Stop & Go function system

turns on, and the MRCC with Stop & Go function standby indication (white) turns

on and the vehicle speed and the distance between the vehicles while in headway

control can be set.

In addition, the MRCC with Stop & Go function system display indication is

displayed on the multi-information display and the active driving display at the same

time.

NOTE

If the ignition is switched o

ff

 while the MRCC with Stop & Go function system is

operating, the system will be operable when the ignition is switched ON the next

time.

How to set the speed

Adjust the vehicle speed to the desired setting using the accelerator pedal and press

the RES switch up (SET+) or down (SET

-

) to start headway control.

The set speed is indicated on the display. At the same time, the MRCC standby

indication (white) changes to the MRCC set indication (green).

Travel status

Indication on multi-information

display

Indication on active driving dis-

play

During travel at constant speed

During travel under headway
control

When Driving

i-ACTIVSENSE

4-134

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34