How to set the distance-between-vehicles during headway control; Indication on multi-information; Indication on active driving dis-- Page 277

NOTE



If a vehicle ahead is detected while traveling at a constant speed, the

vehicle-ahead indication is displayed and headway control is performed.

Additionally, when a vehicle ahead is no longer detected, the vehicle-ahead

indication turns o

ff

 and the system switches back to travel at constant speed.



The lowest possible speed which can be set on the MRCC with Stop & Go

function system is 30 km/h (19 mph).



Headway control is not possible if the vehicle ahead is driving faster than your

vehicle's set speed. Adjust the system to the desired vehicle speed using the

accelerator pedal.

How to set the distance-between-vehicles during headway control

The distance-between-vehicles can be set to 4 levels; Long, medium, short, and

extremely short distance.

The distance-between-vehicles is set to a shorter distance by pressing the CANCEL

switch down. The distance-between-vehicles is set to a longer distance by pressing

the CANCEL switch up.

Distance-between-vehicles

guideline

(at 80 km/h (50 mph) vehicle

speed)

Indication on multi-information

display

Indication on active driving dis-

play

*1

Long (about 50 m (164 ft))

Medium (about 40 m (131 ft))

Short (about 30 m (98 ft))

When Driving

i-ACTIVSENSE

4-135

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34