Black plate (137,1)
NOTE
l
When driving slowly, the gears may
not shift up depending on vehicle
speed.
l
In manual shift mode, gears do not
shift up automatically. Don't run the
engine with the tachometer needle in
the RED ZONE. If the tachometer
needle enters the RED ZONE, you
may feel engine-braking because the
fuel delivery will be stopped to
protect the engine. However, this
does not indicate an abnormality.
l
Gears may not be shifted from M1 to
M2 right after shifting the lever from
D to M. Wait a few seconds and then
shift up to M2.
l
When depressing the accelerator
fully, the transaxle will shift to a
lower gear, depending on vehicle
speed.
Manually Shifting down
(M6
*
→
M5
*
→
M4
→
M3
→
M2
→
M1)
To shift down to a lower gear, tap the shift
lever forward (
) once.
* 3.0-liter engine model
WARNING
Sudden Engine-Braking:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed could
cause the tires to skid. This could lead
to loss of vehicle control and an
accident. Do not use sudden engine
braking on slippery road surfaces or at
high speeds.
NOTE
l
When driving at high speeds, the
gear may not shift down depending
on vehicle speed.
l
During deceleration, the gear may
automatically shift down depending
on vehicle speed.
l
When depressing the accelerator
fully, the transaxle will shift to a
lower gear, depending on vehicle
speed.
Shifting specification (2.3-liter engine
model)
Shifting up
If the vehicle speed is lower than the speed specified
for each gear, the gear cannot be shifted up to a
higher gear.
Gear
Vehicle speed
M1
→
M2
You can shift up to M2 whether
the vehicle is stopped or moving.
M2
→
M3
20 km/h (12 mph)
M3
→
M4
35 km/h (22 mph)
Driving Your Mazda
Starting and Driving
5-13
Mazda6_8T55-EA-04G_Edition2 Page137
Monday, November 15 2004 1:52 PM
Form No.8T55-EA-04G