Driving Position Memory; Essential Safety Equipment; Programming using a button on- Page 20

▼

Driving Position Memory

*

The desired driving position can be called
up after programming the position.
The following driving positions can be
programmed.



Driver’s seat position (seat slide, height
adjustment, front edge of seat bottom,
seat recline)
Refer to Seat Operation on page 2-5.



Active driving display (display position,
brightness level, display information)
Refer to Active Driving Display on page
4-27.

CAUTION

Do not place fingers or hands around the
bottom of the seat while the seat memory
function is operating. The seat moves
automatically while the seat memory
function is operating and fingers or hands
could get pinched and injured.

SET button

The driving position can be programmed
or operated using the buttons on the side
of the seat or the key.

NOTE



Individual seat positions can be
programmed to the two available
programming buttons on the side of the
driver's seat, plus one seat position for
each registered key.



If the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.

Programming

1. Make sure the parking brake is on.
2.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

3. Start the engine.
4. Adjust the seat and the active driving

display to the desired driving position.

5. Press the SET button on the seat until a

beep sound is heard one time.

6. Perform one of the following settings

within 5 seconds of completing step 5
above:



Programming using a button on
the side of the seat

Press the button you want to
program, either button 1 or 2, until a
beep sound is heard one time.



Programming using the key

Press the key   button until a beep
sound is heard one time.

NOTE

If a beep sound is heard three times, the
operation is canceled.

Essential Safety Equipment

Seats

2-8

*Some models.

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49