When Driving; Mazda Radar Cruise Control (MRCC) Display Indication- Page 238



During headway control travel, the system accelerates and decelerates your vehicle in
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.



While the Mazda Radar Cruise Control (MRCC) system is in use, it does not cancel even
if the selector lever is operated and any intended engine braking will not occur. If
deceleration is required, lower the vehicle speed setting or depress the brake pedal.



The brake lights are illuminated while the Mazda Radar Cruise Control (MRCC)
automatic braking is operating.



If there is a problem with the Mazda Radar Cruise Control (MRCC) system, a message is
displayed in the multi-information display. Check the center display to verify the problem
and then have your vehicle inspected by an Authorized Mazda Dealer.
Refer to Message Indicated on Display on page 7-36.



The headway control operation can be canceled and the system can be switched to only
cruise control. Refer to Cruise Control Function on page 4-117.

▼

Mazda Radar Cruise Control (MRCC) Display Indication

The setting status and operation conditions of the Mazda Radar Cruise Control (MRCC)
system are indicated in the multi-information display and the active driving display.

MRCC Distance 
between vehicle 
display

MRCC Set vehicle speed

Vehicle ahead display

MRCC Set 
vehicle speed

MRCC Distance 
between vehicle 
display

Vehicle ahead display

When Driving

i-ACTIVSENSE

4-112

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49