When Driving- Page 250

The Lane-keep Assist System (LAS) &
Lane Departure Warning System (LDWS)
goes on stand-by status in the following
cases:



The system cannot detect white (yellow)
lane lines.



The vehicle speed is less than about 60
km/h (37 mph).



The ABS/TCS/DSC is operating.



The DSC is turned off.
(If the DSC is turned off while the
system is operational, a warning beep is
heard and the system goes on standby.)



The vehicle is making a sharp curve.



The driver takes his or her hands off the
steering wheel (not holding the steering
wheel).



The brake pedal is depressed.

NOTE



The Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) does not operate until the
system detects white (yellow) lane lines
on either the left or right.



When the system detects a white
(yellow) lane line on one side only, the
system will not activate warnings for the
lane line on the side that is not being
detected. The warning is only for a lane
deviation on the side that is being
detected.



If the driver takes his or her hands off
the steering wheel (not holding the
steering wheel), the warning sound is
activated and an alert is indicated in the
multi-information display.
 

If the steering wheel is held lightly, or
depending on the road conditions, the
system may detect that you have
released the steering wheel (not holding
the steering wheel) even if you are
holding it, and display a message in the
multi-information display.



The timing at which the lane departure
warning is activated and the steering
wheel operation assist is performed
varies.



The following settings for the Lane-keep
Assist System (LAS) & Lane Departure
Warning System (LDWS) can be
changed. Refer to Personalization
Features on page 9-10.



Steering operation assist operational/
non-operational



Cancel sensitivity (likelihood of
steering assist)

When Driving

i-ACTIVSENSE

4-124

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49