Owner Maintenance; Replacing a Tire; Always use tires that are in good condition:- Page 421

Also, inspect them for uneven wear and
damage. Abnormal wear is usually caused
by one or a combination of the following:
 



Incorrect tire pressure



Improper wheel alignment



Out-of-balance wheel



Severe braking

 
After rotation, inflate all tire pressures to
specification (page 9-8) and inspect the
lug nuts for tightness.
After adjusting the tire pressure,
initialization of the tire pressure
monitoring system is necessary to make
the system operate normally.
Refer to Tire Pressure Monitoring System
Initialization on page 4-156.

CAUTION

Rotate unidirectional tires and radial tires
that have an asymmetrical tread pattern or
studs only from front to rear, not from side
to side. Tire performance will be reduced if
rotated from side to side.

▼

Replacing a Tire

WARNING

Always use tires that are in good condition:

Driving with worn tires is dangerous.
Reduced braking, steering, and traction
could result in an accident.

Replace all four tires at the same time:

Replacing just one tire is dangerous. It
could cause poor handling and poor
braking resulting in loss of vehicle control.
Mazda strongly recommends that you
replace all four tires at the same time.

If a tire wears evenly, a wear indicator will
appear as a solid band across the tread.
Replace the tire when this happens.

New tread

Tread wear indicator

Worn tread

You should replace the tire before the band
crosses the entire tread.
After adjusting the tire pressure,
initialization of the tire pressure
monitoring system is necessary to make
the system operate normally.
Refer to Tire Pressure Monitoring System
Initialization on page 4-156.

Maintenance and Care

Owner Maintenance

6-39

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49