Using Automatic Locking Mode; Essential Safety Equipment; Child Restraint- Page 45

2017 Mazda Mazda6 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

WARNING

 

Always attach the tether strap to the
correct tether anchor position:

Attaching the tether strap to the incorrect
tether anchor position is dangerous. In a
collision, the tether strap could come off
and loosen the child-restraint system. If the
child-restraint system moves it could result
in death or injury to the child.

Always remove the head restraint and
install child-restraint system:

Installing a child-restraint system without
removing the head restraint is dangerous.
The child-restraint system cannot be
installed correctly which may result in
death or injury to the child in a collision.

Anchor bracket

Tether strap

Anchor bracket

Tether strap

Always install the head restraint and adjust
it to the appropriate position after
removing the child-restraint system:

Driving with the head restraint removed is
dangerous as impact to the occupant's
head cannot be prevented during
emergency braking or in a collision, which
could result in a serious accident, injury or
death.
Refer to Head Restraints on page 2-12.

Using Automatic Locking Mode

*

Follow these instructions when using a
child-restraint system, unless you are
attaching a LATCH-equipped
child-restraint system to the rear LATCH
lower anchors. Refer to “Using LATCH
Lower Anchor” (page 2-39).

NOTE

Follow the child-restraint system
manufacturer's instructions carefully. If
you are not sure whether you have a
LATCH system or tether, check in the
child-restraint system manufacturer's
instructions and follow them accordingly.
Depending on the type of child-restraint
system, it may use LATCH system instead
of seat belts or if the belt goes across the
child's chest, may recommend against
using automatic locking mode.

1. Make sure the seatback is securely

latched by pushing it back until it is
fully locked.

2. Remove the head restraint. However,

when installing a backless booster seat,
always install the vehicle head restraint
to the seat where the backless booster
seat is installed.
Refer to Head Restraints on page 2-12.

Essential Safety Equipment

Child Restraint

*Some models.

2-33

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49

Detailed Information for 2017 Mazda Mazda6 Owners Manual

Lists of information found in 2017 Mazda Mazda6 Owners Manual - Page 45

  • 12. ▼ Using Automatic Locking Mode * Follow these instructions when using a child-restraint system, unless you are attaching a LATCH-equipped child-restraint system to the rear LATCH lower anchors.
  • 1. Make sure the seatback is securely latched by pushing it back until it is fully locked.
  • 2. Remove the head restraint.
  • 12. Essential Safety Equipment Child Restraint *Some models.

Related Documents for 2017 Mazda Mazda6 Owners Manual