Black plate (277,1)
CAUTION
Noise may occur during playback if
the accessory socket equipped on the
vehicle is used. (If noise occurs, do
not use the accessory socket.)
NOTE
l
Before using the auxiliary jack, read the
manufacturer's instructions for the product
being connected.
l
Use a commercially-available, non-
impedance (3.5
) stereo mini plug for
connecting the portable audio unit to the
auxiliary jack. Before using the auxiliary
jack, read the manufacture's instructions
for connecting a portable audio unit to the
auxiliary jack.
l
To prevent discharging of the battery, do
not use the auxiliary input for long periods
with the engine off or idling.
l
Noise may occur depending on the product
connected to the auxiliary jack.
l
With regard to connecting a portable audio
or similar device to a power source, use the
battery for the device, not the accessory
socket.
l
Insert the plug to the auxiliary jack
securely.
l
Insert or remove the plug with the plug
perpendicular to the auxiliary jack hole.
l
Insert or remove the plug by holding its
base.
To listen to a portable audio unit
1. Turn the ignition switch to the ACC or
ON position.
2. Insert the connection plug into the
auxiliary jack.
3. Press the power/volume dial to turn the
audio system on.
4. Press the AUX button (
) of the
audio unit or the mode switch (
)
of the audio control switches on the
steering wheel to change to the AUX
mode.
Audio Unit
Audio Control
Switches
NOTE
l
Set the volume of the portable audio unit to
the maximum within the range that the
sound does not become distorted, then
adjust the volume using the power/volume
dial of the audio unit or the volume switch
(
,
) of the audio control switch.
l
Use your portable audio unit for operations
other than volume adjustment.
l
If the connection plug is pulled out from the
auxiliary jack while in AUX mode, noise
may occur.
Interior Comfort
Audio System
6-59
MX-5_8AV1-EA-09F_Edition2 Page277
Thursday, July 30 2009 2:45 PM
Form No.8AV1-EA-09F