Owner Maintenance; Maintenance and Care; Front side-marker lights- Page 385

6–47

Maintenance and Care

Owner Maintenance

5.  Disconnect the bulb from the socket.

6.  Install the new bulb in the reverse order 

of the removal procedure.

Front side-marker lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  If you are changing the right bulb, start 

the engine, turn the steering wheel 

all the way to the right, and turn off 

engine. If you are changing the left 

bulb, turn the steering wheel to the left.

3.  Pull the center of each plastic retainer 

and remove the retainers, and then 

partially peel back the mudguard.

Removal

Installation

4.  Turn the socket and bulb assembly 

counterclockwise and remove it.

5.  Disconnect the bulb from the socket.

6.  Install the new bulb in the reverse order 

of the removal procedure.

Front turn signal lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  If you are changing the right bulb, start 

the engine, turn the steering wheel 

all the way to the right, and turn off 

engine. If you are changing the left 

bulb, turn the steering wheel to the left.

3.  Pull the center of each plastic retainer 

and remove the retainers, and then 

partially peel back the mudguard.

Removal

Installation

MX-5_8EU4-EA-15D_Edition3.indb   47

2015/10/21   16:55:23