Owner Maintenance; Maintenance and Care; Side turn signal lights- Page 386

6–48

Maintenance and Care

Owner Maintenance

4.  Disconnect the connector from the unit 

by pressing the tab on the connector 

with your finger and pulling the 

connector rearward.

5.  Turn the socket and bulb assembly 

counterclockwise and remove it.

6.  Disconnect the bulb from the socket.

7.  Install the new bulb in the reverse order 

of the removal procedure.

Side turn signal lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  If you are changing the right bulb, start 

the engine, turn the steering wheel 

all the way to the right, and turn off 

engine. If you are changing the left 

bulb, turn the steering wheel to the left.

3.  Pull the center of each plastic retainer 

and remove the retainers, and then 

partially peel back the mudguard.

Removal

Installation

4.  Remove the unit by pressing the tab on 

the unit with your finger and pulling the 

unit forward.

5.  Detach the electrical connector from 

the unit by pulling it to the rear.

6.  Install the new side turn signal unit 

in the reverse order of the removal 

procedure.

MX-5_8EU4-EA-15D_Edition3.indb   48

2015/10/21   16:55:24