Owner Maintenance; Maintenance and Care- Page 389

6–51

Maintenance and Care

Owner Maintenance

8.  To remove the rear combination lamp 

unit, insert your finger from inside the 

trunk and into the hole from which the 

grommet was removed in Step 5, and 

while holding the lamp lens (round 

part) of the rear combination lamp with 

your hand, press the rear combination 

lamp unit until the hook detaches from 

the clip.

Rear combination lamp unit

Hook

Grommet installation 
hole

9.  After the hook is detached, pull out 

the rear combination lamp unit in the 

direction of the arrow and remove it.

Grommet installation hole

Clip

Hook

Rear combination 
lamp unit

CAUTION

Carefully pull out the rear combination 

lamp unit when removing it from the 

body.

The wiring may become damaged 

if the rear combination lamp unit is 

forcefully pulled out.

10. Turn the socket and bulb assembly 

counterclockwise and remove it.

11. Disconnect the bulb from the socket.

12. Install the new bulb in the reverse order 

of the removal procedure.

MX-5_8EU4-EA-15D_Edition3.indb   51

2015/10/21   16:55:26