Owner Maintenance; Maintenance and Care; Rear side-maker lights- Page 390

6–52

Maintenance and Care

Owner Maintenance

Rear side-maker lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Turn the socket and bulb assembly 

counterclockwise and remove it.

3.  Disconnect the bulb from the socket.

4.  Install the new bulb in the reverse order 

of the removal procedure.

Reverse lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Turn the socket and bulb assembly 

counterclockwise and remove it.

3.  Disconnect the bulb from the socket.

4.  Install the new bulb in the reverse order 

of the removal procedure.

License plate lights

1.  Make sure the ignition is switched off, 

and the headlight switch is off.

2.  Remove the unit by pressing the tab on 

the unit with your finger and pulling the 

unit downward.

3.  Turn the socket and bulb assembly 

counterclockwise and remove it.

MX-5_8EU4-EA-15D_Edition3.indb   52

2015/10/21   16:55:27