Replacing Exterior Light Bulbs; Owner Maintenance; Headlights, Daytime running lights- Page 336

CAUTION

When removing the lens or lamp unit using a flathead screwdriver, make sure that the
flathead screwdriver does not contact the interior terminal. If the flathead screwdriver
contacts the terminal, a short circuit may occur.

NOTE



To replace the bulb, contact an Authorized Mazda Dealer.



Use the protective cover and carton for the replacement bulb to dispose of the old bulb
promptly and out of the reach of children.

▼

Replacing Exterior Light Bulbs

Headlights, Daytime running lights
(LED type), Parking lights, High-mount
brake light, Brake lights, Taillights

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Daytime running lights (Bulb type)

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Pull the center of each plastic retainer

and remove the retainers.
 

Removal

Installation

3. Turn the screw counterclockwise and

remove it, and then partially peel back
the mudguard.
 

4. Turn the socket and bulb assembly

counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse

order of the removal procedure.

Maintenance and Care

Owner Maintenance

6-39

MX-5_8JS9-EA-20K_Edition1_old

2020-8-28 13:50:01