Owner Maintenance; Rear turn signal lights; Maintenance and Care- Page 339

6. Install the new side turn signal unit in

the reverse order of the removal
procedure.

Rear turn signal lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Pull the center of each plastic retainer

and remove the retainers and the trunk
end trim.
 

Removal

Installation

3. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.
 

4. Pull the center of each plastic retainer

and remove the retainers, and then
partially peel back the trunk side trim.
 

Removal

Installation

Maintenance and Care

Owner Maintenance

6-42

MX-5_8JS9-EA-20K_Edition1_old

2020-8-28 13:50:01