Owner Maintenance; Maintenance and Care; Replacing a Fog Light Bulb*- Page 259

8-33

Maintenance and Care

Owner Maintenance

Form No. 8R65-EA-03C

5. Carefully remove the headlight bulb 

from the socket by pulling it straight 
back.

6. Replace the bulb.

7. Install the new bulb in the reverse order 

of removal.

▼

Replacing a Fog Light Bulb*

Due to the complexity and difficulty of 
the procedure, the bulbs should be 
replaced by an Authorized Mazda Dealer.

▼

Replacing a Bulb (Front)

1. If you are changing the right bulb, start 

the engine, turn the steering wheel all 
the way to the right, and turn off 
engine. If you are changing the left 
bulb, turn the steering wheel to the left.

2. Turn the center section of the plastic 

retainer counterclockwise and remove 
the retainers and partially peel back the 
mudguard.

Front turn signal lights, Parking lights, 
Front side-marker lights

1. Turn the socket and bulb assembly 

counterclockwise and remove it.

2. Disconnect the bulb from the socket.

3. Install the new bulb in the reverse order 

of removal.

NOTE

Use the protective cover and carton of 
the replacement bulb to dispose of the 
old bulb promptly out of the reach of 
children.

Removal

Installation

Front turn signal 
lights
Parking lights

Socket

Socket

Front side-marker lights

Socket

*Some models.

J60E_8R65-EA-03C_Edition6.book  Page 33  Wednesday, December 10, 2003  4:24 PM

Black process 45.0

°

 240.0 LPI