Owner Maintenance; Maintenance and Care; Replacing a Bulb (Interior)- Page 260

8-34

Maintenance and Care

Owner Maintenance

Form No. 8R65-EA-03C

▼

Replacing a Bulb (Interior)

Overhead light/Map lights (Front)

1. Remove the screws with a Phillips 

screwdriver.

2. Wrap a flathead screwdriver with a soft 

cloth to prevent damage to the trim and 
gently insert it in the overhead light as 
shown in the figure, and then remove 
the overhead light unit.

3. Turn the socket and bulb assembly 

counterclockwise and remove it.

4. Disconnect the bulb from the socket.

5. Install the new bulb in the reverse order 

of removal.

Overhead light (Rear), Courtesy lights, 
Vanity mirror lights

1. Wrap a small flathead screwdriver with 

a soft cloth to prevent damage to the 
lens and remove the lens by carefully 
prying on the edge of the lens with the 
screwdriver.

2. Disconnect the bulb by pulling it out.

Socket

Edge

Overhead light (Rear)

Courtesy lights

Edge

Vanity mirror lights

Edge

J60E_8R65-EA-03C_Edition6.book  Page 34  Wednesday, December 10, 2003  4:24 PM

Black process 45.0

°

 240.0 LPI