Roadside Emergencies; under the rear trailing arm.; Never use the differentials as a- Page 169

2003 Mazda Tribute Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

Rear

jacking notches are located

under the rear trailing arm.

6. Position the jack according to

the following guides and turn

the jack handle clockwise until

the tire is a maximum of 25 mm

(1 inch) off the ground.

Never use the differentials as a

jacking point. It is too easy for

the vehicle to tilt or fall and you

can be injured.

WARNING: To lessen the risk

of personal injury, do not put

any part of your body under

the vehicle while changing a

tire. Do not start the engine

when your vehicle is on the

jack. The jack is only meant

for changing the tire.

7. Remove the lug nuts with the lug nut wrench.

8. Replace the flat tire with the spare tire, making sure the valve stem

is facing outward. Reinstall lug nuts until the wheel is snug against

the hub. Do not fully tighten the lug nuts until the wheel has been

lowered.

Roadside Emergencies

169

Detailed Information for 2003 Mazda Tribute Owners Manual

Lists of information found in 2003 Mazda Tribute Owners Manual - Page 169

  • 6. Position the jack according to the following guides and turn the jack handle clockwise until the tire is a maximum of 25 mm (1 inch) off the ground.
  • 7. Remove the lug nuts with the lug nut wrench.
  • 8. Replace the flat tire with the spare tire, making sure the valve stem is facing outward.
  • Rear jacking notches are located under the rear trailing arm.