The remote entry system allows you
to lock or unlock all vehicle doors
without a key. The remote feature
will only operate when the ignition
is in the 1 (LOCK) or 2 (ACC)
position.
If there is a problem with the
remote entry system make sure to
take
ALL remote entry
transmitters
with you to the
dealership, this will aid in
troubleshooting the problem.
Unlocking the doors
1. Press
and release to unlock the driver’s door.
Note:
The interior
lamps will illuminate, if the control on the overhead lamp is in the
DOOR position, the flashers will flash twice, and the perimeter alarm
system (if equipped) will deactivate.
2. Press
and release again within three seconds to unlock the
passenger doors, the liftgate and liftgate glass.
The remote entry system activates the illuminated entry feature. This
feature turns on all the interior lamps for 30 seconds or until the ignition
is turned to the RUN position. If the dome lamp control (if equipped) is
in the
off
position, the illuminated entry feature will not work.
The inside lights will not turn off if:
•
they have been turned on using the dome lamp control or
•
any door is open.
The battery saver feature will turn off the interior lamps 40 minutes after
the ignition is turned to the OFF position.
Locking the doors
1. Press
and release to lock all the doors. The park lamps will flash
once and the perimeter alarm (if equipped) will be start the arming
process. For more information concerning the perimeter alarm, refer
to
Perimeter alarm system (if equipped)
later in this chapter.
2. Press
and release again within three seconds to confirm that all
the doors are closed and locked.
If any of the doors or the hood are not properly closed the horn will not
sound and the park lamps will not flash.
2004 Mazda Tribute
(j14)
Owners Guide (post-2002-fmt)
USA English
(fus)
Locks and Security
72