2004 Mazda Tribute; Owners Guide (post-2002-fmt); Locks and Security- Page 74

2004 Mazda Tribute Owners Manaul

Model Year
2014 Dodge Charger SRT Owner Manual
background image

Note:

This procedure must be

completed within the specified
times. If not completed within the
specified time period,
reprogramming procedures must be
restarted from the beginning.

To reprogram the remote entry
transmitters:

1. Ensure the vehicle is electronically unlocked.

2. Put the key in the ignition.

3. Turn the key from the 1 (LOCK) position to 3 (ON).

4. Cycle eight times rapidly (within 10 seconds) between the 1 (LOCK)

position and 3 (ON).

Note:

The eighth turn must end in the 3 (ON)

position.

5. The doors will lock, then unlock, to confirm that the programming

mode has been activated.

6. Within 20 seconds press any button on the remote entry transmitter.

Note:

If more than 20 seconds have passed you will need to start

the procedure over again.

7. The doors will lock, then unlock, to confirm that this remote entry

transmitter has been programmed.

8. Repeat Step 6 to program each additional remote entry transmitter.

9. Turn the ignition to the 1 (LOCK) position after you have finished

programming all of the remote entry transmitters.

10. The doors will lock, then unlock, to confirm that the programming

mode has been exited.

Illuminated entry

The interior lamps illuminate when the remote entry system is used to
unlock the door(s) or sound the personal alarm.

The illuminated entry system will turn off the interior lights if:

the ignition switch is turned to the RUN position, or

the remote transmitter lock control is pressed, or

after 30 seconds of illumination.

2004 Mazda Tribute

(j14)

Owners Guide (post-2002-fmt)
USA English

(fus)

Locks and Security

74

Detailed Information for 2004 Mazda Tribute Owners Manaul

Lists of information found in 2004 Mazda Tribute Owners Manaul - Page 74

  • 1. Ensure the vehicle is electronically unlocked.
  • 2. Put the key in the ignition.
  • 3. Turn the key from the 1 (LOCK) position to 3 (ON).
  • 4. Cycle eight times rapidly (within 10 seconds) between the 1 (LOCK) position and 3 (ON).
  • 5. The doors will lock, then unlock, to confirm that the programming mode has been activated.
  • 6. Within 20 seconds press any button on the remote entry transmitter.
  • 7. The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed.
  • 8. Repeat Step 6 to program each additional remote entry transmitter.
  • 9. Turn the ignition to the 1 (LOCK) position after you have finished programming all of the remote entry transmitters.
  • the ignition switch is turned to the RUN position, or • the remote transmitter lock control is pressed, or • after 30 seconds of illumination.