It is dangerous to get out of your vehicle if the; shift lever is not fully in PARK (P) with the; parking brake firmly set. Your vehicle can roll.- Page 81

yellow

blue     

2-21

Maximum engine speed is limited on automatic
transaxle vehicles when you’re in PARK (P) or
NEUTRAL (N) to protect driveline components from
improper operation.

There are several different positions for your shift lever.

PARK (P): This locks your front wheels. It’s the best
position to use when you start your engine because your
vehicle can’t move easily.

CAUTION:

It is dangerous to get out of your vehicle if the
shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll.

Don’t leave your vehicle when the engine is
running unless you have to. If you have left the
engine running, the vehicle can move suddenly.

CAUTION: (Continued)

CAUTION: (Continued)

You or others could be injured. To be sure your
vehicle won’t move, even when you’re on fairly
level ground, always set your parking brake and
move the shift lever to PARK (P).

See “Shifting Into PARK (P)” in the Index. If
you’re pulling a trailer, see “Towing a Trailer” in
the Index.

Make sure the shift lever is fully in PARK (P) before
starting the engine. Your vehicle has a Brake

-

Transaxle

Shift Interlock (BTSI). You must fully apply your regular
brakes before you can shift from PARK (P) when the
ignition is in RUN. If you cannot shift out of PARK (P),
ease pressure on the shift lever by pushing it all the way
into PARK (P) while keeping the brake pedal pushed
down. See “Shifting Out of PARK (P)” in the Index.