Vehicle Care; If a jack is used to raise; the vehicle without positioning it- Page 376

2012 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (72,1)

Buick Enclave Owner Manual - 2012

10-72

Vehicle Care

The triangle is located near each
wheel on the vehicle's exterior.

Notice:

If a jack is used to raise

the vehicle without positioning it
correctly, the vehicle could be
damaged. When raising the
vehicle on a jack, avoid contact
with the rear axle control arms.

5. Attach the wrench to the jack,

and turn the wrench clockwise to
raise the jack head 7.6 cm (3 in).

6. Do not raise the vehicle yet. Put

the compact spare tire near you.

{

WARNING

Getting under a vehicle when it is
lifted on a jack is dangerous.
If the vehicle slips off the jack,
you could be badly injured or
killed. Never get under a vehicle
when it is supported only by
a jack.

{

WARNING

Raising the vehicle with the jack
improperly positioned can
damage the vehicle and even
make the vehicle fall. To help
avoid personal injury and vehicle
damage, be sure to fit the jack lift
head into the proper location
before raising the vehicle.

7. Raise the vehicle by turning the

wrench clockwise in the jack.
Raise the vehicle far enough off

the ground so that there is
enough room for the spare tire to
fit under the wheel well.

8. Remove all the wheel nuts and

the flat tire.

9. Remove the plastic spare tire

heat shield by pulling the rubber
latch. Store the plastic spare tire
heat shield. See

Storing the

Spare Tire

later in this section

for more information.

Detailed Information for 2012 Buick enclave Owner Manual

Lists of information found in 2012 Buick enclave Owner Manual - Page 376

  • 5. Attach the wrench to the jack, and turn the wrench clockwise to raise the jack head 7.
  • 6. Do not raise the vehicle yet.
  • 7. Raise the vehicle by turning the wrench clockwise in the jack.
  • 8. Remove all the wheel nuts and the flat tire.
  • 9. Remove the plastic spare tire heat shield by pulling the rubber latch.