Vehicle Care; If the vehicle is towed; without performing each of the- Page 388

2012 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (84,1)

Buick Enclave Owner Manual - 2012

10-84

Vehicle Care

6. To prevent the battery from

draining while the vehicle is
being towed, remove the
20 amp ECM1 fuse and the
50 amp BATT1 fuse from the
underhood fuse block and store
in a safe location. See

Engine

Compartment Fuse Block on
page 10

32

.

7. Release the parking brake.

Notice:

If the vehicle is towed

without performing each of the
steps listed under

Dinghy

Towing,

the automatic

transmission could be damaged.
Be sure to follow all steps of the
dinghy towing procedure prior to
and after towing the vehicle.

Notice:

If 105 km/h (65 mph) is

exceeded while towing the
vehicle, it could be damaged.
Never exceed 105 km/h (65 mph)
while towing the vehicle.

Once the destination is reached:

1. Set the parking brake.

2. Reinstall the fuses in the

underhood fuse block.

3. Shift the transmission to

P (Park), turn the ignition to
LOCK/OFF and remove the
key from the ignition.

4. Disconnect the vehicle from

the towing vehicle.

Notice:

Do not tow a vehicle with

the front drive wheels on the
ground if one of the front tires is
a compact spare tire. Towing with
two different tire sizes on the
front of the vehicle can cause
severe damage to the
transmission.

Dolly Towing (All-Wheel

Drive

Vehicles)

All-wheel

drive vehicles must not be

towed with two wheels on the
ground. To properly tow these
vehicles, they should be placed on
a platform trailer with all four wheels
off of the ground or dinghy towed
from the front.

Detailed Information for 2012 Buick enclave Owner Manual

Lists of information found in 2012 Buick enclave Owner Manual - Page 388

  • 6. To prevent the battery from draining while the vehicle is being towed, remove the 20 amp ECM1 fuse and the 50 amp BATT1 fuse from the underhood fuse block and store in a safe location.
  • 7. Release the parking brake.
  • 1. Set the parking brake.
  • 2. Reinstall the fuses in the underhood fuse block.
  • 3. Shift the transmission to P (Park), turn the ignition to LOCK/OFF and remove the key from the ignition.
  • 4. Disconnect the vehicle from the towing vehicle.