Keys, Doors, and Windows- Page 46

2012 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (16,1)

Buick Enclave Owner Manual - 2012

2-16

Keys, Doors, and Windows

The security light comes on if
there is a problem with arming or
disarming the theft-deterrent
system.

When the PASS-Key III+ system
senses an incorrect key, the vehicle
does not start. Anyone using a
trial-and-error method to start the
vehicle will be discouraged because
of the high number of electrical
key codes.

If the engine does not start and the
security light on the instrument
panel comes on when trying to start
the vehicle, there may be a problem
with the theft-deterrent system.
Turn the ignition off and try again.

If the engine still does not start, and
the key appears to be undamaged,
try another ignition key and check
the fuses. See

Fuses and Circuit

Breakers on page 10

32

for

additional information. If the engine
still does not start with the other key,
the vehicle needs service.

If the vehicle does start, the first key
may be faulty. See your dealer who
can service the PASS-Key III+ to
have a new key made. In an
emergency, contact Roadside
Assistance. See

Roadside

Assistance Program (Mexico) on
page 13

11

or

Roadside Assistance

Program (U.S. and Canada) on
page 13

8

.

It is possible for the PASS-Key III+
decoder to learn the transponder
value of a new or replacement key.
Up to 10 keys may be programmed
to the vehicle. The following
procedure is for programming
additional keys only. If all currently
programmed keys are lost or do not
operate, you must see your dealer
or a locksmith who can service
PASS-Key III+ to have keys made
and programmed to the system.

See your dealer or a locksmith who
can service PASS-Key III+ to get a
new key blank that is cut exactly as
the ignition key that operates the
system.

To program the new additional key:

1. Verify that the new key has a

1

stamped on it.

2. Insert the already programmed

key in the ignition and start the
engine. If the engine does not
start, see your dealer for service.

3. After the engine has started, turn

the key to LOCK/OFF, and
remove the key.

4. Insert the key to be programmed

and turn it to the ON/RUN
position within five seconds of
the original key being turned to
the LOCK/OFF position.

The security light turns off once
the key has been programmed.

5. Repeat Steps 1 through 4 if

additional keys are to be
programmed.

If the PASS-Key III+ key is lost or
damaged, see your dealer or a
locksmith to have a new key made.

Detailed Information for 2012 Buick enclave Owner Manual

Lists of information found in 2012 Buick enclave Owner Manual - Page 46

  • 1. Verify that the new key has a 1 stamped on it.
  • 2. Insert the already programmed key in the ignition and start the engine.
  • 3. After the engine has started, turn the key to LOCK/OFF, and remove the key.
  • 4. Insert the key to be programmed and turn it to the ON/RUN position within five seconds of the original key being turned to the LOCK/OFF position.
  • 5. Repeat Steps 1 through 4 if additional keys are to be programmed.