Buick/Chevrolet/GMC InTouch Infotainment System (GMNA-Localizing-U.S/
Canada-9234745) - 2016 - crc - 9/9/15
Rear Seat Infotainment
39
auxiliary device to the A/V jacks.
Refer to the manufacturer
’
s
instructions for proper usage.
Power for auxiliary devices is not
supplied by the radio system.
To use the auxiliary inputs of the
RSE system, connect an external
auxiliary device to the color-coded
A/V jacks and turn both the auxiliary
device and the video screen power
on. If the video screen is in the DVD
player mode, pressing the AUX
(auxiliary) button on the remote
control switches the video screen
from the DVD player mode to the
auxiliary device. The radio can listen
to the audio of the connected
auxiliary device by sourcing to
auxiliary. See
How to Change the RSE Video
Screen Settings
The screen display mode (normal,
full, and zoom), screen brightness,
and setup menu language can be
changed from the on screen setup
menu by using the remote control.
To change a setting:
1. Press
z
.
2. Use
n
,
q
,
p
,
o
and
r
to
navigate and use the
setup menu.
3. Press
z
again to remove the
setup menu from the screen.
Audio Output
Audio from the DVD player or
auxiliary inputs can be heard
through the following sources:
.
Wireless headphones
.
Vehicle speakers
.
Vehicle-wired headphone jacks
on the RSA system, if equipped
The RSE system always transmits
the audio signal to the wireless
headphones, if there is audio
available. See
“
Headphones
”
earlier
in this section.
The DVD player is capable of
outputting audio to the wired
headphone jacks on the RSA
system, if equipped. The DVD
player can be selected as an audio
source on the RSA system. See
“
Rear Seat Audio (RSA) System
”
in
the owner manual.
When a device is connected to the
A/V jacks or the radio's auxiliary
input jack, if equipped, the rear seat
passengers are able to hear audio
from the auxiliary device through the
wireless or wired headphones. The
front seat passengers are able to
listen to playback from this device
through the vehicle speakers by
selecting AUX as the source up
front on the radio.
Video Screen
The video screen is in the overhead
console. When the video screen is
not in use, push it up into its locked
position.
To use the video screen:
1. Press the release button on the
overhead console.
2. Move the screen to the desired
position.
If a DVD is playing and the screen
is raised to its locked position, the
screen remains on; this is normal,