Vehicle Care; Removing the Spare Tire- Page 286

2016 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159225) - 2016 - crc - 7/31/15

Vehicle Care

285

1. Tool Bag
2. Wing Bolt
3. Jack

1. Open the jack storage

compartment by pulling on the
latch tab, located toward the
rear of the vehicle, and pulling
the cover off.

2. Remove the wing bolt (2) by

turning it counterclockwise.

3. Push the jack (3) up out of the

holding bracket and remove
the tool bag (1).

4. Turn the jack on its side, with

the bottom facing toward you.

5. Pull the jack straight out,

bottom first.

1. Jack
2. Wrench (Three-Piece

Shown, One-Piece Similar)

The tools you will be using include
the jack (1) and wrench (2).

Removing the Spare Tire

The compact spare tire is located
under the vehicle, in front of the rear
bumper. See

Compact Spare Tire

0

291

for more information.

1. Rear Convenience Center
2. Wrench (Three-Piece

Shown, One-Piece Similar)

3. Carpet Cutout
4. Hoist Shaft
5. Compact Spare Tire
6. Retainer

1. Open the storage compartment

door of the convenience
center (1) that is nearest the
liftgate.

2. Open the carpet cutout (3) that

is located through the hole of
the storage compartment.

3. Attach the wrench (2) into the

hoist shaft (4).

Detailed Information for 2016 Buick enclave Owner Manual

Lists of information found in 2016 Buick enclave Owner Manual - Page 286

  • 1. Tool Bag 2.
  • 3. Jack 1.
  • 2. Remove the wing bolt (2) by turning it counterclockwise.
  • 3. Push the jack (3) up out of the holding bracket and remove the tool bag (1).
  • 4. Turn the jack on its side, with the bottom facing toward you.
  • 5. Pull the jack straight out, bottom first.
  • 1. Jack 2.
  • 1. Rear Convenience Center 2.
  • 3. Carpet Cutout 4.
  • 5. Compact Spare Tire 6.
  • 1. Open the storage compartment door of the convenience center (1) that is nearest the liftgate.
  • 2. Open the carpet cutout (3) that is located through the hole of the storage compartment.
  • 3. Attach the wrench (2) into the hoist shaft (4).