Seats and Restraints; Removing the Third Row Seats; Installing the Third Row Seats- Page 56

2016 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159225) - 2016 - crc - 7/31/15

Seats and Restraints

55

row seat, or lift the seatback
and push it into place from
inside the vehicle.

{

Warning

If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.

2. Push and pull on the seatback

to make sure it is locked in
place.

{

Warning

A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be

(Continued)

Warning (Continued)

sure that the safety belts are
properly routed and attached, and
are not twisted.

3. Reconnect the center safety

belt mini-latch to the
mini-buckle. Do not let it twist.

4. Pull on the safety belt to be

sure the mini-latch is secure.

Removing the Third Row Seats

To remove a third row seat:

1. Remove the cargo

management system, if it is
installed. See

Cargo

Management System

0

97

.

2. Remove anything on or under

the seat.

Caution

Folding a rear seat with the safety
belts still fastened may cause
damage to the seat or the safety

(Continued)

Caution (Continued)

belts. Always unbuckle the safety
belts and return them to their
normal stowed position before
folding a rear seat.

3. Fold the seatback down. See

Folding the Seatback

earlier

in this section.

4. Remove the rear bolts on the

floor on each side of the seat.

5. Remove the seat by tilting it

slightly upward, and then
pulling it out of the rear of the
vehicle in one motion.

6. Replace the bolts in the floor

holes for storage.

Installing the Third Row Seats

To reinstall a third row seat:

1. Before installing the seat, the

seatback must be folded
forward. See

Folding the

Seatback

earlier in this

section.

Detailed Information for 2016 Buick enclave Owner Manual

Lists of information found in 2016 Buick enclave Owner Manual - Page 56

  • 2. Push and pull on the seatback to make sure it is locked in place.
  • 3. Reconnect the center safety belt mini-latch to the mini-buckle.
  • 4. Pull on the safety belt to be sure the mini-latch is secure.
  • 1. Remove the cargo management system, if it is installed.
  • 2. Remove anything on or under the seat.
  • 3. Fold the seatback down.
  • 4. Remove the rear bolts on the floor on each side of the seat.
  • 5. Remove the seat by tilting it slightly upward, and then pulling it out of the rear of the vehicle in one motion.
  • 6. Replace the bolts in the floor holes for storage.
  • 1. Before installing the seat, the seatback must be folded forward.