Hood; Vehicle Care- Page 271

2019 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
Driving and Operating
10-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

12146155) - 2019 - crc - 9/10/18

270

Vehicle Care

If equipped with remote vehicle
start, open the hood before
performing any service work to
prevent remote starting the vehicle
accidentally. See

Remote Vehicle

Start

0

36

.

Keep a record with all parts receipts
and list the mileage and the date of
any service work performed. See

Maintenance Records

0

356

.

Caution

Even small amounts of
contamination can cause damage
to vehicle systems. Do not allow
contaminants to contact the fluids,
reservoir caps, or dipsticks.

Hood

To open the hood:

1. Pull the hood release handle

with this symbol on it. It is
under the instrument panel on
the driver side of the vehicle.

2. At the front of the vehicle, pull

up on the center of the hood,
and push the secondary hood
release to the right.

3. After you have partially lifted

the hood, gas struts will
automatically take over to lift
and hold the hood in the fully
open position.

To close the hood:

1. Before closing the hood, be

sure all filler caps are properly
installed.

2. Pull the hood down to close.

Lower the hood until the lifting
pressure of the strut is
reduced. Then allow the hood
to fall and latch into place
under its own weight

3. Check to make sure the hood

is closed. If the hood does not
fully latch, gently push the
hood down at the front and
center of the hood until it is
completely latched.

Detailed Information for 2019 Buick enclave Owner Manual

Lists of information found in 2019 Buick enclave Owner Manual - Page 271

  • 1. Pull the hood release handle with this symbol on it.
  • 2. At the front of the vehicle, pull up on the center of the hood, and push the secondary hood release to the right.
  • 3. After you have partially lifted the hood, gas struts will automatically take over to lift and hold the hood in the fully open position.
  • 1. Before closing the hood, be sure all filler caps are properly installed.
  • 2. Pull the hood down to close.
  • 3. Check to make sure the hood is closed.