Rear Pedestrian Alert; Rear Pedestrian Alert Indicator; Driving and Operating- Page 244

2022 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

22_BUI_Enclave_OM_en_US_U_84742926A_2021JUN04_HI
08-Driving and Operating_en_US
Driving and Operating
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

15253195) - 2022 - CRC - 6/1/21

Driving and Operating

243

system is turned off, a system off message
is shown on the display. This message
disappears after a short period of time.

Turn off Park Assist when towing a trailer to
prevent unwanted beeps and when a bike
rack is attached to ensure proper operation.

When the System Does Not Seem to Work
Properly

If a service message displays, check the
following conditions:

.

The sensors may not be clean. Keep the
vehicle's front and rear bumpers free of
mud, dirt, snow, ice, and slush. For
cleaning instructions, see

Exterior Care

0

326

.

.

The Park Assist sensors may be covered
by frost or ice. Frost or ice can form
around and behind the sensors and may
not always be seen; this can occur after
washing the vehicle in cold weather. The
message may not clear until the frost or
ice has melted.

If a service message displays and the above
conditions do not exist, take the vehicle to
your dealer for repairs.

If the Park Assist System does not activate
due to a temporary condition, a system off
message is shown on the display. This can
occur under the following conditions:

.

The driver has disabled the system.

.

An object is currently blocking the rear
sensors (for example, bike rack, tailgate,
trailer hitch, etc.). Once the object is
removed, Park Assist will return to normal
operation.

.

The bumper is damaged. Take the vehicle
to your dealer for repairs.

.

Other conditions, such as vibrations from
a jackhammer or the compression of air
brakes on a very large truck, are affecting
system performance.

Rear Pedestrian Alert

Under certain conditions, this feature can
provide alerts for a pedestrian within the
system

s range directly behind the vehicle.

This feature only works in R (Reverse) below
12 km/h (8 mph), and detects pedestrians up
to 8 m (26 ft) away during daytime driving.
During nighttime driving, feature
performance is very limited.

Rear Pedestrian Alert Indicator

When a pedestrian is detected within the
system

s range directly behind the vehicle,

this symbol flashes amber on the
infotainment display, along with two beeps
from the rear, or if equipped, two pulses
from both sides of the driver seat. When a
pedestrian is detected close to the vehicle,
the symbol flashes red on the infotainment
display, along with seven beeps from the
rear, or if equipped, seven pulses from both
sides of the driver seat.