Vehicle Care; Spare Tire; Removing the Flat Tire and Installing the- Page 298

2021 Buick Envision Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick E2UB-N Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

14583509) - 2021 - CRC - 1/8/21

Vehicle Care

297

2. Lift and fold the rear part of the load

floor to the front, pull it rearward to
disengage the clips, then pull upward to
remove it.

3. Turn the retainer nut counterclockwise to

remove the spare tire. Place the spare
tire next to the tire being changed.

4. The jack and tools are stored below the

spare tire. Remove them from their
container and place them near the tire
being changed.

Removing the Flat Tire and Installing the
Spare Tire

Take off the wheel cover or center cap,
if the vehicle has one, to reach the wheel
bolts.

1. Do a safety check before proceeding. See

If a Tire Goes Flat

0

295

for more

information.

2. Turn the wheel wrench counterclockwise

to loosen and remove the wheel nut
caps. Do not try to remove plastic caps
from the cover or center cap.

3. Pull the cover or center cap away from

the wheel. Store the wheel cover in the
cargo area until you have the flat tire
repaired or replaced.

4. Turn the wheel wrench counterclockwise

to loosen all the wheel nuts, but do not
remove them yet.

5. Place the jack near the flat tire.
6. Put the compact spare tire near you.

{

Warning

Getting under a vehicle when it is lifted
on a jack is dangerous. If the vehicle slips
off the jack, you could be badly injured
or killed. Never get under a vehicle when
it is supported only by a jack.

{

Warning

Raising the vehicle with the jack
improperly positioned can damage the
vehicle and even make the vehicle fall. To
help avoid personal injury and vehicle
damage, be sure to fit the jack lift head
into the proper location before raising
the vehicle.

{

Warning

Lifting a vehicle and getting under it to
do maintenance or repairs is dangerous
without the appropriate safety equipment
and training. If a jack is provided with
the vehicle, it is designed only for
changing a flat tire. If it is used for
anything else, you or others could be

(Continued)

Detailed Information for 2021 Buick Envision Owner Manual

Lists of information found in 2021 Buick Envision Owner Manual - Page 298

  • 2. Lift and fold the rear part of the load floor to the front, pull it rearward to disengage the clips, then pull upward to remove it.
  • 3. Turn the retainer nut counterclockwise to remove the spare tire.
  • 4. The jack and tools are stored below the spare tire.
  • 1. Do a safety check before proceeding.
  • 2. Turn the wheel wrench counterclockwise to loosen and remove the wheel nut caps.
  • 3. Pull the cover or center cap away from the wheel.
  • 4. Turn the wheel wrench counterclockwise to loosen all the wheel nuts, but do not remove them yet.
  • 5. Place the jack near the flat tire.
  • 6. Put the compact spare tire near you.