Headlamp System; Daytime Running Lamps; Interior Lamps- Page 13

Exterior Lamps and Automatic
Headlamp System

You will find the exterior lamps knob on
the left side of the instrument panel. 

(On/Off): 

To turn the headlamps off

when the lights are on, turn the control
to the 

position. The momentary

switch design springs back to AUTO
when released. 

AUTO:

Activates the automatic head-

lamp system, illuminating all exterior
lamps and the instrument panel/radio
lights when needed. 

(Parking Lamps):

The parking lamp

position illuminates tail/side marker/
license plate lamps and instrument
panel/radio lights. 

(Headlamps):

The headlamps posi-

tion manually activates the headlamps,
exterior tail/marker lamps and instru-
ment panel/radio lights. 

(Fog Lamps):

To activate the fog

lamps, press the center of the rotary
control marked 

. 

To switch headlamps from low to high
beam, push the multifunction lever away
from you. Pull it back and release for
low-beam operation. 

See Section 3 of your Owner Manual.

Daytime Running Lamps

The Daytime Running Lamps (DRLs)
illuminate the low-beam headlamps at a
lower intensity in daylight to make the
front of the vehicle more visible to
others. The DRLs do not illuminate the
taillamps or side marker lamps. 

See Section 3 of your Owner Manual.

Interior Lamps

The interior lamps control is located next to
the exterior lamps control on the left side
of the instrument panel. It can be set to:

(Off):

This position disables the

interior lamps entirely, whether or not a
door is open.

(Door):

This position turns on the

interior lamps when a door is opened
and when the ignition key is removed.

(On):

This position turns on the 

interior lamps continuously.

Instrument Panel Brightness:

When

you push the center of the interior lamps
knob, a spring-loaded stem will pop out.
Turn it right or left to adjust intensity. 

Reading Lamps:

Press the reading light

lens to turn on/off. 

See Section 3 of your Owner Manual.

13